4.1.4. Connect
Set up the connection with BluetoothGPS device. When you try to connect
to BluetoothGPS device, the window shown in Figure 1 will appear. It
means a successful connection when the window in figure 2 appears. If the
window is shown as Figure 3, it means the connection is failed, please try
it again.
Figure 1
4.1.5. Auto Scan
Automatically scan the BluetoothGPS COM port in order to connect to
BluetoothGPS device.
4.1.6. Disconnect
Disconnect to the BluetoothGPS device.
Note:
When performing the Auto Scan, the user has to wait for a while because it will need
time to get necessary system information from BluetoothGPS.
1