Updating The Firmware - Sony Rolly SEP-30BT Operating Instructions Manual

Updating the Firmware

By installing the latest firmware, you can add new functions and features to the player.
For details on the latest firmware and the updating method, visit the website below.
http://rolly.sony-europe.com/support
1
Download the update program to your computer from the home page of
the Rolly customer support.

Connect the player to your computer, and start the update program.

Follow the instructions of the update program.
The firmware will be updated.
Downloaded from ManualMPlayer.com Manuals

Troubleshooting
If the player does not function as expected, try the following steps to resolve the problem.
1
Find the symptoms of the problem in the following troubleshooting tables, and
try the corrective actions listed.
2
Press the Reset button with a small pin or the like.
Even if you press the Reset button, stored music and motion data are retained. However,
playback settings (volume, stop position, normal/shuffle playback, etc.) may be reset to
the default setting.
3
Check for information about the problem in Rolly Choreographer.
4
Look for information about the problem on the website below.
http://rolly.sony-europe.com/support
5
If the approaches listed above fail to resolve the problem, consult your nearest
Sony dealer or Sony Service Center.
Playing music/motion
Symptom Cause/Remedy
Buttons do not work. The player contains moisture condensation.


The remaining battery power is low or insufficient.




Playback does not start even if you The Power switch is set to OFF.

click the Play button.

Wait for a few hours to let the player dry.
Charge the battery sufficiently ( page 12)

If nothing happens after you charge the battery
sufficiently, press the Reset button to reset the player
( page 49).

Repeat inserting and removing the battery several times.
Set the Power switch to ON.
continued
