Rear Seat Climate Controls - GMC Envoy XUV 2004 Getting To Know Manual

Getting to Know Your Envoy XUV
8
Manually raise or lower fan speed
• Press the upper or lower portion of
the FAN control (
Manually adjust the dual temperature
controls
• Use the knob on the left-hand side of
the climate control panel to adjust the
temperature on the driver side of the
vehicle. Use the right-hand knob to
adjust the temperature on the pas-
senger side of the vehicle as well as
the second row.
• To match and link the passenger-side
temperature to the driver's setting,
press and hold the AUTO button for
three seconds.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the RECIRCULATE (
button.
This feature can be activated while in
the VENT or BI-LEVEL mode, but not in
DEFOG, DEFROST or FLOOR mode.
Clear the windshield and front side
windows of fog or frost more quickly
• Press the FRONT DEFROST (
button.
Clear the rear glass of fog or frost
more quickly, and activate the heated
outside rearview mirrors (if equipped)
• Press the REAR DEFOG (
button.
Adjust and memorize the preferred
automatic settings for two drivers
• Press the button with the unlock sym-
bol on the remote keyless entry trans-
mitter, or press one of the memory
buttons on the driver's door.
) button.
)
)
)
Note: There are two key fobs identified
as fob 1 and 2 that correspond to the
memory buttons 1 and 2 on the driver's
door.
• Push the AUTO button and adjust
the temperature knob to the desired
temperature to set automatic air
delivery mode, fan speed, A/C and
recirculation functions for the driver.
• Press AUTO again within five
seconds and settings for the front
passenger are displayed and can be
adjusted.
• The new settings are automatically
memorized for the driver as identified
by the Remote Keyless Entry trans-
mitter or by memory button.
See Section 3 of your Owner Manual.

Rear Seat Climate Controls

Turn the rear controls on and off
• Press the Power ( ) button. Note:
The rear controls do not function
when the front climate control is on
and not in DEFROST mode.)
Increase or decrease fan speed
• Press the Fan (
arrows to increase or decrease fan
speed.
) up or down