Entertainment Systems - GMC Envoy XUV 2004 Getting To Know Manual

Table of Contents

Advertisement

• When the vehicle is shifted out of
REVERSE (R), the mirrors return to
their original positions, and the
REVERSE (R) positions are saved for
the current driver, driver 1 or 2.
See Sections 2 and 3 of your Owner Manual.

Entertainment Systems

Set the time
Your radio may have a button marked
"H" or "HR" to represent hours and an
"M" or "MIN" to represent minutes.
• Press and hold the hour button until
the correct hour appears on the
display.
• Press and hold the minute button
until the correct minute appears on
the display.
The time may be set with the ignition on
or off.
Set the time to an FM station's Radio
Data System (RDS) setting
Press and hold both hour and minute
buttons at the same time for two sec-
onds until UPDATED and the clock
symbol appear on the display.
If the time is not available from the
station, NO UPDATE appears in the
display.
Program radio station presets
• Turn the radio on.
• Press AM-FM to select the band
(AM, FM1/FM2/XM1/XM2).
• Use the seek or tune knob to tune in
the desired station.
• Press AUTO EQ or AUTO TONE (as
applicable to your radio) to select the
equalization that best suits the type of
station selected.
• Press and hold one of the six num-
bered buttons until a beep sounds;
release the button.
Repeat these steps for each station pre-
set, using a different numbered button
for each station.
Activate the Radio Data System
(RDS) traffic announcement feature
(if equipped)
• Press TRAF. <TRAF> will appear on
the display if the tuned station broad-
casts traffic announcements.
If the tuned station does not broadcast
traffic announcements, the radio will
seek a station that does. If no station is
found, NO TRAF appears on the display.
Display a station's INFO message
when INFO appears on the display
• Press INFO to see the message.
Once the complete message has
been displayed, INFO disappears
from the display.
Tune to an RDS broadcast of a
selected program type
• Turn the P-TYPE knob to select the
Program Type you want to listen to.
• Press the SEEK or SEEK TYPE but-
ton (as applies to your radio).
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents