Instrument Panel Cluster; Malfunction Indicator Lamp; Driver Information Center - GMC Envoy XUV 2004 Getting To Know Manual

Table of Contents

Advertisement

Getting to Know Your Envoy XUV
4

Malfunction Indicator Lamp

(Service Engine Soon Lamp)
This instrument panel lamp illuminates
under a variety of conditions when the
On-Board Diagnostics II (OBD II) system
detects a malfunction in the vehicle's
emission controls.
If the Malfunction Indicator Lamp is lit
steadily, check the gas cap to ensure
it is present and secure
• Turn the cap clockwise until a "ratch-
eting" sound is heard, signaling that it
is secure.
• If this is the cause of the condition, a
few driving trips with the cap installed
properly should turn the light off.
See Section 3 of your Owner Manual

Driver Information Center

The Driver Information Center (DIC) fea-
tures a message center that can display
trip information, fuel economy informa-
tion, personalization features and other
messages or warnings.The DIC display
is located above the steering wheel on
the instrument cluster, and can be pro-
grammed in three languages. To access
the various DIC modes, press one of
the four DIC buttons located on the
steering wheel: Trip Information, Fuel
Information, Personalization or Select.
Trip Information Button: Press
to access each of the odometer,
TRIP A, TRIP B and TIMER functions.
To reset either trip odometer to zero,
access it on the DIC and press the
Select button (
press and hold the reset stem on the
instrument cluster.
Use the TIMER function to time the
length of your trip, pressing the Select
button to start or stop the timer when the
function is displayed on the DIC. To
reset it to zero, press and hold the
Select button when the function is dis-
played on the DIC.
Fuel Information Button: Press
to access the range, average fuel
economy, instant fuel economy and the
GM Oil Life System
RANGE estimates the remaining dis-
tance you can drive without refueling.
It is based on recent fuel economy and
remaining fuel.
AVG ECON calculates how many miles
per gallon you are getting based on cur-
rent and past driving conditions. Press
and hold the reset button while it is dis-
played and the DIC will begin calculating
average fuel economy from that point in
time.
) for one second, or
TM
status.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents