Operation - Oricom VAC500 User Manual

Operation

1. To set time
1. Press and hold SET for 2 seconds
2. Press UP to display AM, PM, 12 or 24-hour clock; press SET to select
3. Press UP or DN to set the Hour, press SET to select. Repeat these
steps to set Minute.
2. To set alarm time & snooze
1. Press MODE to go to Alarm mode, press and hold SET for 2 seconds
to select
2. Press UP or DN to set the alarm hour, press SET to select.
Repeat these steps to set Minute.
3. While SNOZ is ashing, press SET to turn on the snooze function or
press UP to turn it off. It will automatically return to the normal clock
mode after about 5 seconds.
4. If SNOOZE function is on -- when the alarm sounds, the alarm will
continue for 40 seconds and then stop. If the SNOOZE button is
pushed any time while the alarm is sounding, the alarm will stop
immediately but it will sound again in eight minutes. You can repeat
this cycle for up to seven times. To stop the alarm completely any
time, press any button other than the SNOOZE button on top of the
clock.
5. If SNOOZE function is off --- when the alarm sounds, pressing the
SNOOZE button will stop the alarm completely.
3. To set alarm on/off & alarm mode
1. Slide the switch to OFF to disable the alarm or to stop the on-going
alarm action.
2. Slide the switch to AUDIO, SHAKER or ALL (audio + shaker) to select
your alarm mode and to set the Alarm On.
Operation
5