Oricom VISO10 User Manual

VISO10 User Manual
1. Features
- Easy to Read and Understand Time display
- Perpetual Calendar Up to Year 2099
- Day of week & Month in 8 languages user
selectable
2. Unit Appearance
1
Part A-LCD Part B-Button
A1: Day of the Week
B1: "MODE/
A2: Radio Control Icon
B2: "▼" Button
A3: Time
B3: "RESET" Button
A4: Month
B4: "▲" Button
A5: Date
B5: "WAVE/
A6: Year
Part C-Structure
C1: Hanging Hole
C2: Battery Door
C3: Stand
3. Getting started:
● Open the battery Cover (C2).
● Insert 2 x AA size alkaline batteries observing polarity ["+"
and "–"marks]. There is "click" sound when insert batteries
to remind user the batteries was inserted correctly.
● Replace the battery compartment cover.
● Place the unit onto flat surface; the unit is ready for
use now.
4. Time Setting
4.1 Manual Time Setting:
● In time display, hold "MODE/ " button (B1) for 3
seconds to enter Clock/Calendar setting Mode.
● Press "▼" (B2) or "▲" (B4) button to adjust the setting and
press "MODE" button (B1) to confirm each setting.
● (By keeping the "▼" (B2) or "▲" (B4) button pressed, could
accelerate the process and reach the desired value more
quickly)
● The setting sequence is shown as follow:, Weekday & Month
Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone,
Hour, Minute, Year, Month, Day, DST.
● There are 8 languages, English, German, French, Spanish,
Italian, Dutch, Polish and Swedish, for day-of-week & Month.
2
4.2 Radio Controlled Time:
● The Radio Controlled Time setting on the VISO10 will not
work in Australia. Ensure this is turned off in the settings.
"Button
To do this:
1) In time display, hold "MODE/
3 seconds to enter Clock/Calendar setting Mode.
" Button
2) Press "▼" (B2) or "▲" (B4) button to navigate to the
RCC (Radio Clock) ON/OFF setting.
3) Ensure that RCC is set to RCC OFF inside of Australia.
4) Confirm the selection by clicking the "MODE/
Button (B1).
5. Lock buttons
● Hold "▼" (B2) and "▲" (B4) button at the same time for
5 seconds to lock the rest buttons. When rest buttons'
functions been locked, icon "
(B2) and "▲" (B4) button 5 seconds again to unlock.
6. Precautions
● The clock loses its time information when the battery is
removed.
● Use a pin to press the reset button if the Unit does not
work properly.
● Do not expose it to direct sunlight, heavy heat, cold, high
humidity or wet areas.
● Never clean the device using abrasive or corrosive materials
or products. Abrasive cleaning agents may scratch plastic
parts and corrode electronic circuits.
7. Express Warranty (Australia)
This Express Warranty is provided by Oricom International Pty
Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South
Windsor NSW 2756, herein after referred to as "Oricom".
Oricom products come with guarantees that cannot be exclud-
ed under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure.
" Button (B1) for
"
" displayed. Hold "▼"
3