Related Manuals for Oricom WNS1
Summary of Contents for Oricom WNS1
- Page 1 Oricom WNS1 Jumbo Display Alarm Clock and Shaker User Guide Keep this user guide for future reference...
- Page 3 WARNINGS WARNINGS Before installing or changing the battery make sure that the telephone is not connected to the telephone network or the mains power supply. When inserting batteries into this product, observe the proper polarity or direction, failure may result in leakage or explosion.
- Page 4 We recommend you replace the old battery every 12 months, if there is frequently power outage, the battery need to be replaced more frequently. A leaking battery can destroy your WNS1. INSTALLING THE 9 VOLT BATTERY - Before installing or changing the battery make sure that the telephone is not connected to the telephone network or the mains power supply.
-
Page 5: Location Of Controls
LOCATION OF CONTROLS 1 PM LED indicator 2 -Alarm LED indicator 3 -Strobe light and snooze button V V+S S+F F+V A+T OFF T VOLUME TONE 1 -Alarm mode switch 6 Alarm off 2 Alarm and ring volume 7 Alarm tone 8 Alarm + ring / Off / Ring 3 Set alarm 4 Set clock... -
Page 6: Initial Setup
INITIAL SETUP PACK CONTENTS Unpack the unit and check to be sure you have all the items below. • 1 Jumbo display /alarm clock (WNS1) • 1 modular line Cord • 1 Double adaptor plug • 1 Shaker • This User guide... -
Page 7: Setting The Alarm Time
ALARM AND CLOCK FUNCTION SETTING THE TIME ( Press and hold (set clock) button. Press H (hour) and M (minute) until correct hour and minutes appear on the display. Release (set clock) button. For p.m. hours, the p.m. indicator will appear on the display near the inscription PM. - Page 8 ALARM AND CLOCK FUNCTION When the alarm is set to one of the alarm modes, the alarm indicator will appear on the display near the inscription AL. The table below shows how the alarm modes indicate an incoming call from the alarm clock. ALARM MODE ACTION ALARM C LOCK...
- Page 9 T (telephone): for the telephone ring position. HOW TO USE WITH YOUR TELEPHONE Ensure that your telephone is connected to the WNS1 as shown in the installation section. Select the ringer On/Off switch on the A+T or T position for the ring.
- Page 10 ALARM AND CLOCK FUNCTION TONE This allows you to select the tone of the alarm sound that is best for you. SHAKER SWITCH ( - / + ) Sets the motion of the shaker to Lo (-) or Hi (+) - 8 -...
- Page 11 CARE CLEANING The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use cleaning agents,particularly aggressive solvents. Apart from occasional cleaning of the case, no other care is necessary. The rubber feet on the base are not resistant to all cleaning agents. The rubber feet do not normally leave any marks on the surface.
-
Page 12: Customer Support
Please retain your purchase receipt and attach to the back page of this user guide as you will need to produce this if warranty service is required. Take a few moments to register your product online: www.oricom.com.au. - 10 -... -
Page 13: Warranty
WARRANTY How to make a claim under Warranty in Australia Oricom has a simple warranty process for you to follow: Please call or email our Customer Support Team, contact details follow. A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. - Page 14 WARRANTY Please note that this warranty excludes expenses incurred by you in returning any faulty product to us. You must arrange and pay any expenses incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to us, however, we will arrange delivery of the repaired or replaced faulty product to you.
- Page 15 Warranty. Any implied warranties that may be imposed by law are limited in duration to the Warranty Period. Oricom warrants that the product is free from defects in materials or workmanship during the Warranty Period. This Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia.
- Page 16 No change to the conditions of this Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom. Oricom will not be in breach of a warranty expressly set out in this User Guide or under the Competition and - 14 -...
- Page 17 Oricom or Oricom’s authorised service provider. Oricom will not be liable for any damages caused by the product or the failure of the product to perform, including any lost profits or savings or special, incidental or consequential damages.
- Page 18 WARRANTY modified, Oricom limits the remedies available to those specified in the relevant legislation. Oricom products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.