Lap-Shoulder Belt Installation - HAPPY KIDZ Doona User Manual

48

12.1. Lap-Shoulder Belt Installation

WARNING
• The handle must be in position C (anti-rebound position) for
correct installation in the car.
• The Doona Car Seat must be properly
reclined. The seat is properly reclined
when the red level line on the side sticker
is parallel to the ground when installed
without the Doona Base.
STEP 1: Place the Doona Car Seat rear-facing on the vehicle seat (child is
facing backwards).
NOTE: Simple Parenting recommends installing the Doona Car Seat only
in a rear vehicle seating position. If you must install your seat in a front
vehicle seating position, check your vehicle manual to verify that it is safe
to install a child restraint in this position and for more information about
installing a child restraint in this position.
STEP 2: Place the handle (#2) in car seat mode, position C.
TH E NE X T G E N E R AT I O N C A R S EA T