Download Print this page

Jenn-Air JDE3000 Use And Care Manual page 9

Electric & gas
Hide thumbs Also See for JDE3000:

Advertisement

1.
Energy can be conserved by selecting and using the Automatic
6.
Don't add wet things to a partially dried load.
Controls. However, to minimize wrinkling of clothing, load should
be removed immediately after dryer shuts off.
7.
Try to plan to do your laundry on low humidity days. Clothes dry
faster.
2.
TheWRINKLE OUT Featureshould not be used whenthe clothes
load can be removed from the dryer immediately after the dryer
8.
Avoid excessive exhausting. Long ducting and turns can increase
shuts off, If clothes load cannot be removed immediately, the
drying time, using more energy.
WRINKLE OUT setting should be used to minimize wrinkling.
9.
Using cold rinses in your washer saves energy, but it also means
3.
Keep lint filter clean for the best air flow and most efficient use of
more drying time. The energy used for drying is less than would
energy when drying,
be needed to heat rinse water.
4.
Do not over dry.
10. Use your dryer during non-peak times as recommended by your
local utility company. This does not save you energy but helps to
5.
Dry lightweight fabrics separately from heavy fabrics as this will
free electrical power during peak periods.
result in more even drying and less opening of the door. Each
time the door is opened warm air escapes.

Advertisement

loading

This manual is also suitable for:

Jdg3000