Initial Set Up Procedure - rec tec grill RT-300 Owner's Manual

Initial Set Up Procedure

For your first lighting, follow this Initial Set Up Procedure.
Before starting your Rec Tec Mini Grill, inspect the burn area inside the grilling area. It is a
recommended practice to go through the following procedure at initial start up.
1. Open the main lid and remove the Stainless Steel Cooking Grate.
2. Remove the Stainless Steel Drip Pan and the Stainless Steel Flame Deflector.
3. Open the Pellet Hopper Lid found on the left side of your grill and check for any foreign
objects.
4. Plug your Rec Tec Grill into the nearest 110 Volt AC GFI outlet. (Note: If your home does
not have a GFI outlet, you should have one installed by an electrician.)
Familiarize yourself with the operation of the Smart Grill Technology™
control panel before continuing (see page 11).
5. Turn on your Rec Tec Mini Grill by pressing the power button at the left of the panel.
6. Look in the fire pot and confirm that the auger is turning clockwise, hold your hand above the
fire pot to confirm the fan is blowing air through the fire pot, and then turn your grill off.
7. Pour pellets into your grill's pellet hopper and restart your grill.
8. Reinstall the stainless steel Flame Deflector, Drip Pan and Cooking Grate.
9. Within a few minutes you will see white smoke, and your grill will light.
Main Power
Questions?
Call our customer service at 1-855-696-0890
10am-8pm EST, M-F. Or visit RecTecGrills.com.
Temp
Smart Grill Technology™ • www.RecTecGrills.com
10
Actual
Temp
Xtreme
Display Smoke
On
Set Point
©2014, Rec Tec Industries, LLC