rec tec grill RT-300 Owner's Manual page 9

STEP 3 – Flame Deflector, Drip Pan and Cooking Grate Installation
Open the lid of the Rec Tec Grill. Install the Flame Deflector 1 over the Air Box Assembly A
with the small notches over the small tabs located at the inside front and rear of the grill body.
Install Drip Pan 2 with the short lip located on lip support b on the left side of the grill body and
the longer lip should rest in the lower support on the right side of the grill body.
BE CAREFUL NOT TO DAMAGE THE TEMPERATURE SENSOR c WHILE
INSTALLING THE DRIP PAN. (TIP: many customers line their drip pan with aluminum foil
for easier clean up.)
Install the cooking grate 3.
Congratulations! Your Rec Tec Grill is now completely assembled and ready for use. Please read
BEFORE THE FIRST USE on the page 8 before operation.
Be Careful Not To
Damage the
Temperature Sensor c
During These Steps.
COOKING GRATE
3
C
B
DRIP PAN
2
6
A
FLAME DEFLECTOR
1
©2014, Rec Tec Industries, LLC