Advertisement
Quick Links
I.
Safety Instructions ............................................
II.
General Owner's Instructions................................
III.
8400JF Parts Included, Tools Needed, & Unit Specs.....
IV.
3.1JF Parts Included, Tools Needed, & Unit Specs.......
V.
8400JF & 3.1JF Assembly & Installation Instructions....
VI.
5.1JF Parts Included, Tools Needed, & Unit Specs.......
VII.
5.1JF Assembly & Installation Instructions................
VIII.
Nozzles & Pattern Sizes......................................
IX.
C-85 Control Panel Instructions
X.
C-95 Control Panel Instructions
XI.
Maintenance Recommendations.............................
XII.
Warranty, Warranty Claim, & Return Policy...............
XIII.
8400JF Replacement Parts & Assembly Diagram.........
XIV.
3.1JF Replacement Parts & Assembly Diagram...........
XV.
5.1JF Replacement Parts & Assembly Diagram...........
XVI.
Troubleshooting Tips..........................................
XVII.
Customer Repair Form.......................................
XVIII.
Warranty Registration Information..........................
Phone (715) 262-4488 * Fax (715) 262-4487
www.KascoMarine.com * sales@kascomarine.com
Making a Splash!
CONTENTS
Kasco Marine, Inc.
800 Deere Rd.
Prescott, WI 54021
........
(For 8400JF & 3.1JF)
..................
(For 5.1JF)
2
3
4
5
6-8
9
10-12
13
14
15
16
17-18
19
20
21
22
23
24
Made in the USA
Rev. 5/2/07
Advertisement
Related Manuals for Kasco marine 8400JF
Summary of Contents for Kasco marine 8400JF
- Page 1 CONTENTS Safety Instructions …………………………………….. General Owner’s Instructions………………………….. III. 8400JF Parts Included, Tools Needed, & Unit Specs….. 3.1JF Parts Included, Tools Needed, & Unit Specs……. 8400JF & 3.1JF Assembly & Installation Instructions..5.1JF Parts Included, Tools Needed, & Unit Specs……. VII.
- Page 2 We at Kasco Marine, Inc. would like to both thank and congratulate you on your purchase of the JF model aerating fountain. We appreciate you choosing Kasco and for your purchase. Your decision to purchase Kasco’s 8400JF, 3.1JF, or 5.1JF Aerating Fountain will not disap- point you.
- Page 3 The water is pulled upward and thrust through the flotation collar into the air. Your Kasco Marine Fountain is ready for immediate use (after installation). The motor and ball bear- ings are submerged in oil and no further lubrication is needed. Make sure to keep the motor housing clean from hard water deposits and/or algae.
-
Page 4: Unit Specs
8400JF PARTS INCLUDED A. 8400JF Aerating Fountain (Unit with cord or unit with Disconnect) (1) A1. Cord in separate box (1) (depending on size of cord) B. Float in separate box (1) (Diagram to Right) 1. 3 Float Sections (1) 2. - Page 5 3.1JF PARTS INCLUDED A. 3.1JF Aerating Fountain (Unit with cord or unit with Disconnect) (1) A1. Cord in separate box (1) (depending on size of cord) B. Float in separate box (1) (Diagram to Right) Note: If you purchased 6 lights, refer to 5.1JF Float Assembly 1.
- Page 6 If damages are found, immediately notify your which should now be extending through the assem- carrier and your Kasco Marine, Inc. representative. bly. Loosely install the six 3/8” Lock Nuts (Part Next, cross reference the parts included in the ship- #B5) on the ends of the bolts (do not tighten yet).
- Page 7 To install the Redwood nozzle, make sure the Y In- sert (Part #D4) is installed and seated properly into the Nozzle Housing (Part #D7). Push the nozzle down over the cone assembly (it may require light taps with a rubber mallet to seat properly). Next, use Pictures correspond the 3 Self Tapping Screws (Part #D1) provided in the with Step Six on...
- Page 8 For ease of removal, you may choose to keep at least STEP FOURTEEN one anchor within reach from shore, just below the Hardwire the 240V/208V, 4 wire service into the C- water’s surface. 85 control panel per the Instructions on page 14 of this manual.
- Page 9 5.1JF PARTS INCLUDED A. 5.1JF Aerating Fountain (Unit with cord or unit with Disconnect) (1) A1. Cord in separate box (1) (depending on size of cord) B. Float in separate box (1) (Diagram to Right) 1. 3 Float Sections (1) 2.
- Page 10 If damages are found, immediately notify your which should now be extending through the assem- carrier and your Kasco Marine, Inc. representative. bly. Loosely install the six 3/8” Lock Nuts (Part Next, cross reference the parts included in the ship- #B5) on the ends of the bolts (do not tighten yet).
- Page 11 To install the Redwood nozzle, make sure the Y In- sert (Part #D4) is installed and seated properly into the Nozzle Housing (Part #D7). Push the nozzle down over the cone assembly (it may require light taps with a rubber mallet to seat properly). Next, use Pictures correspond the 3 Self Tapping Screws (Part #D1) provided in the with Step Six on...
- Page 12 For ease of removal, you may choose to keep at least STEP FOURTEEN one anchor within reach from shore, just below the Hardwire the 240V/208V, 4 wire service into the C- water’s surface. 95 control panel per the Instructions on page 15 of this manual.
- Page 13 3/8” x 4” bolt. the Y Insert must be installed. Model HP Height Width Model Height Width 8400JF 8400JF 3.1JF 19’ 35’ 3.1JF 24’ 8’ 5.1JF 26’ 8’ 5.1JF 20’...
- Page 14 Place additional tripper pairs on CLOCK-DIAL (order 156T1978A). • IN CASE OF POWER FAILURE: Reset CLOCK-DIAL to proper time of day. See step 2 above. KASCO MARINE, INC., 800 Deere Road Prescott, WI 54021-1241 • Phone (715) 262-4488 240V. 158PS13244...
- Page 15 Place additional tripper pairs on CLOCK-DIAL (order 156T1978A). • IN CASE OF POWER FAILURE: Reset CLOCK-DIAL to proper time of day. See step 2 above. KASCO MARINE, INC., 800 Deere Road Prescott, WI 54021-1241 • Phone (715) 262-4488 PUMP CIRCUIT...
-
Page 16: Maintenance Recommendations
• ZINC ANODE: A Sacrificial Zinc Anode is supplied on the shaft of all 8400JF, 3.1JF, and 5.1JF Model Fountains for protection of the equipment from corrosion and electrolysis. The zinc anode should be up- dated (replaced) if reduced to half the original size or if white in color. - Page 17 If the customer has registered the Fountain online at: www.kascomarine.com/general_info_warranty_registration.htm , Kasco Marine will have a record of the purchase and will be able to determine whether or not the unit still car- ies warranty coverage.
- Page 18 Any expedited shipping method for the return of the unit is at the customer’s expense. Kasco Marine will re- turn units repaired under warranty at our expense via ground freight within the continental United States.
-
Page 22: Troubleshooting Tips
TROUBLESHOOTING TIPS Below are some helpful troubleshooting tips. If a problem occurs, please double check the assembly and in- stallation instructions as well as the instructions for the proper control panel. More troubleshooting tips can be found at www.kascomarine.com/general_info_troubleshooting.htm . “... - Page 23 3-5 years de- pending on use. • Address your Repair to Kasco Marine, Attn: Repairs (or to your Authorized Repair Center). • Shipping to Kasco or an Authorized Repair Center is paid for by the customer.
- Page 24 Also fill in the information below and keep for your records. Model # (Ex. 3.1JF):_______________________________ Serial # (Ex. 7001J311725):______________________________ Purchase Date:_____________________ Purchased From:___________________________________ Registration Date:___________________________ Kasco Marine, Inc. 800 Deere Rd. Prescott, WI 54021 Phone (715) 262-4488 * Fax (715) 262-4487 www.kascomarine.com * sales@kascomarine.com * service@kascomarine.com 884168...