Special Features - Uniden BTSC1300 Owner's Manual

5
Call Waiting Using the BTSC1300
When another call comes in while you're on the phone, the
BTSC1300 sounds a tone.
- Press MULTI and VOLUME UP simultaneously to answer the
waiting call and end the current call
- Press VOLUME UP and DOWN simultaneously to answer the
waiting call and place the current call on hold.
- Press VOLUME UP and DOWN simultaneously again to
switch between callers.
- Press MULTI and VOLUME DOWN to end a waiting call.
To use this feature, you must subscribe to Call Waiting
through your service provider, and your phone must
support the hands-free profile.
How to Change the BTSC1300 Ring Tone
While the BTSC1300 is in standby, hold down a Volume button
(UP or DOWN) for 3 seconds to hear a ring tone.
Repeat to hear a different ring tone. The last ring tone you hear
will be set as your ring tone.
Caller ID Announce/Text-to-Speech (TTS)
When a call comes in, the BTSC1300 sounds a ring tone. In
addition, the BTSC1300 can use text-to-speech to announce
the caller's phone number.
Press and hold MULTI for 3 seconds to turn TTS on or off. A
soft low-high pitch tone indicates TTS is on. A soft high-low
pitch tone indicates TTS is off.
SC1300 OM 2.indd 7

Special Features

7
23/11/09 5:22:35 PM