Kobalt KCS 120-06 User Manual page 8

SAFETY INFORMATION
The following precautions should be followed to minimize
kickback:
• Always grip the saw firmly with both hands. Place your
right hand on the rear handle and your left hand on the
front handle with your thumbs and fingers encircling
the chain saw handles. A firm grip together with a stiff
left arm will help you maintain control of the saw if
kickback occurs.
• Make sure that the area in which you are cutting is free
from obstructions. Do not let the nose of the guide bar
contact a log, branch, fence, or any other obstruction
that could be hit while you are operating the saw.
• Always cut with the unit running. Fully squeeze the
trigger switch and maintain cutting speed.
• Use only the replacement guide bars and low
kickback chains specified by the manufacturer for the
saw.
• With a basic understanding of kickback, you can
reduce or eliminate the element of surprise. Sudden
surprise contributes to accidents.
• Keep proper footing and balance at all times.
• Do not cut above shoulder height or overreach when
cutting.
• Follow the sharpening and maintenance instructions
for the saw chain.
kobalttools.com
8