Connect the Speakers
1. Place the subwoofer on a fl at surface. Place the two
satellite speakers as far as possible from each other.
2. Connect the plug of the satellite speakers to the
subwoofer's To Speaker jack.
3. Turn o your audio source, then connect the Control
Pod's plug to your audio source.
4. Plug the power cord into a wall outlet.
Note: To connect the Control Pod's plug to your source
n
device, you may need a 3.5mm stereo Y-type cable (not
included).
Use Your Speakers
1. Turn on your audio source.
2. On the Control Pod, slide ON/OFF to ON.
3. Rotate the Volume Control
(on the top of the Control Pod) to
adjust to a comfortable listening
level, and rotate the Bass Vol
control (on the back of the
subwoofer) to desired bass tone.
ON/OFF
5