Advertisement
Cautions:
You must use a Class 2 power
!
source that supplies 9V DC and
delivers at least 800 mA. Its
center tip must be set to negative and its
plug must fit the right speaker's
jack. Using an adapter that does not meet
these specifications could damage the
speaker or the adapter.
Always connect the AC adapter to the speak-
er before you connect it to AC power. When
you finish, disconnect the adapter from AC
power before you disconnect it from the
speaker.
Follow these steps to connect AC power.
1. Make sure
POWER OFF/ON
the right (
) speaker is set to
R
2. If the adapter has a power switch, set the
switch to 9V.
3. Plug
the
Adaptaplug
adapter's cord, matching
(–).
4. Plug the Adaptaplug into to the
jack on the back of the right speaker.
5. Plug the adapter into a standard AC out-
let.
Note: Connecting an AC adapter automatical-
ly disconnects internal batteries.
Using Vehicle Battery Power
Cautions:
You can power the speakers from a vehicle's
12V power source (such as cigarette-lighter
socket) using a 9V, 800 mA DC adapter and a
size M Adaptaplug adapter (neither supplied).
Both are available at your local RadioShack
store.
Cautions:
tip must be set to negative and its plug
must fit the right speaker's
DC 9V
Using an adapter that does not meet
these specifications could damage the
speaker or the adapter.
• Always connect the DC adapter to the
speaker before you connect it to the
power source. When you finish, discon-
nect the adapter from the power source
before you disconnect it from the
speaker.
Follow these steps to power the system from
on the front of
your vehicle's battery.
.
OFF
1. Make sure
the right (
2. Plug the Adaptaplug to the DC adapter
into
the
AC
cord, matching
to negative
TIP
3. Plug the Adaptaplug into the
on the back of the right speaker.
DC 9V
4. Plug the adapter's large plug into the
vehicle's cigarette lighter socket.
CONNECTING THE
SPEAKERS
Caution: To protect your hearing, set
UME MIN/MAX
to its minimum level.
Make sure
right speaker is set to
dio source. Then plug the left speaker's
inch plug into
back of the right speaker. Then plug the right
speaker's
headphone or line out jack.
2
You must use a power source
!
that supplies 9V DC and deliv-
ers at least 800 mA. Its center
POWER OFF/ON
) speaker is set to
R
to negative (–).
TIP
on the front of the right speaker
on the front of the
POWER OFF/ON
, and turn off the ra-
OFF
FROM LEFT SPEAKER
1
/
-inch plug into the audio source's
8
jack.
DC 9V
on the front of
.
OFF
jack
DC 9V
VOL-
1
/
-
8
on the
Advertisement
