EverFocus KS-KBK Operating Instructions Manual page 83

5.13.4 Configurati on
The DVR is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
The DVR should be configured for RS485 type communication, with an appropriate identification address and
baud rate.
5.13.4.1 OSM Configu ration
Connect the DVR directly to the keyboard and a monitor to the MONITOR 1 output.

starts DVR configuration.
The DVR shows the on screen menu; the keyboard display indicates the mode change:




enters the selected submenu

end of configuration
       
Keys
5.13.5 Special SEA RCH menu

enters the special SEARCH menu

exits the menu
       
Keys
Warning: if the DVR stays in SEARCH mode after exiting the menu, press STOP (
normal mode.
5.13.6 Special CO PY menu

enters the special COPY menu

cancels the copy operation and deletes any on screen messages

exits the menu
Warning: the copy operation or, when appropriate, its cancellation by pressing
before exiting the menu
       
Keys
: for movement within the menus and changing the values.
: for movement within the menus and changing the values.
: for movement within the menus and changing the values.
Page 33

) to return to

, should be completed
MNECKSKBK_0350