Alarm - Albrecht DR 460-C User Manual

Alarm

14.3
This option allows you to turn on/off the alarm and program an alarm. You can access
this menu by pressing the alarm button on the remote control too.
Please note that in order to use the alarm function the connected speaker/stereo system
needs to be switched on.
To program an alarm:
1. Go to Configuration > Alarm > Turn On.
2. Select Set Alarm Time and enter values. Refer to the "Text entry" section for details
about inputting numbers.
3. Select Set Alarm Sound to choose a sound type from Beep, Melody, and Radio
(the station you last listen to or if a station has been selected as Use as Alarm
Sound).
4. The icon will appear at the upper right corner of the display to indicate that the
alarm function is activated.
5. When the alarm sounds, press any button to stop it.
60 English