Display; First Time Setup - AMC LIVE Radio User Manual

PRESET
To jump into the forward or backward preset use this button at the moment when station selected from
preset logo is displayed. In other way this button is inactive.
MUTE
To mute the output volume, press this button.
NAVIGATION BUTTONS
Use this buttons to scroll through the menu and push "enter" to enter to the submenu. Please note than up
and down knobs are for the menu scrolling, left and right for the entering to submenu and back to
previously menu page.
PRESET MENU
To view all presets saved in the memory press "P" button on the remote control.
STAND BY
Allows to set standby mode on the device. When device is in standby mode the standby LED located in the
rear panel indicates it.

Display

Please find the symbols which are showed under the bottom line of the display.
- Connection type: WLAN with signal
strength scale.
- Connection type: Ethernet.
- Station selected from preset.
- UPNP mode.

First time setup

When live radio has been activated for the first time, follow these steps to connect your device to the
network. The best way to do this deal is to activate "Setup wizard" in the system setting menu. Before the
starting setup wizard please set the corresponding language if the default menu language is not
understandable for you. Please find out how to change language below:
Main menu > System settings > Language > German
Hauptmenü > Systemeinstellungen > Sprache > English
If live radio is turned on for the first time and setup wizard doesn't start automatically, please, activate wizard
by using menu:
Main menu > System settings > Setup wizard
- Repeat all.
- Shuffle.
- USB mode
- Mute