GMC 2003 Yukon Denali User Manual page 31

Once the seatbacks are folded down, on
Yukon XL Denali models only, the rear seat footwell
area will be exposed and will have to be covered by the
load floor panel. To create a load floor, do the
following:
Returning the Seatbacks to an Upright
Position
1. Release the panels from the seatbacks by pushing
2. Then fold the panels back to cover the rear seat
forward on the latches.
footwell area.
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
To return the seatbacks to the upright position, do the
following:
1. On Yukon XL Denali models, lift the load floor
panels and latch them into the seatback.
2. Lift the seatback up and push it rearward all the
way. On Yukon XL Denali models, move the
headrest to the seatback.
3. Lower the seat cushion until it latches into position.
4. On Yukon Denali models, return the headrests
5. Pull forward on the seatback and up on the seat
to the upright position.
cushion to make sure the seat is securely in place.
1-24