GMC 2003 Yukon Denali User Manual page 21

2. While still holding the lever 3 toward you, grasp the
3. Let go of lever 3 and
pull
the seat completely down.
4. Push down on the seat firmly. Try pulling it up to
top of the seat and pull it toward you slightly.
be sure it is locked into place.
5 .
Pull up
on the release
lever labeled 1 and
then pull up on
the seatback or the
assist strap located on
the outboard side
o f
the seat until the
seatback locks into the
upright position.
Removing the 50/50 Split Bench Seats
To remove the 50/50 split bench seat, do the following:
1. Open the liftgate.
2. Fold the seatback
forward onto the seat
cushion by using
the lever labeled 1.
The seat cannot
be removed unless the
seatback is folded.
1-14