GMC 2003 Yukon Denali User Manual page 27

Removing the Bench Seat
To remove the bench seat, do the following:
1. Open the liftgate.
1-20
2. Fold the seatback
forward onto the seat
cushion by using
the lever labeled 1.
The seat cannot
be removed unless the
seatback is folded.
3. To unlatch the rear of
the seat from the floor,
pull up on the release
lever labeled 2 at
the rear of the seat and
lift the rear of the
seat up from the floor.
4. Pull on the release
strap located in the
lower middle of
the seat to unlatch the
seat from the floor
and pull the seat out.
Use one hand to
pull the release strap
and the other on
the handle to pull the
seat out.
5. While holding the rear of the seat up, roll the seat
out of the vehicle.