Table of Contents
Advertisement
C
S
OOLING
YSTEM
4.1
T
C
™ F
RI
OOL
ANS
Rear / Top TriCool™ Fan – There are 120 x 25mm TriCool™ fans pre-installed at the rear and
top of the case. They have external, three-speed switches that let you choose between quiet,
performance, or maximum cooling on each of the fans. The default speed setting is Low.
two fans are mounted so that the air is blowing out of the case. There are externally accessible switches
for these fans located at the top rear of your case.
Size:
Rated Voltage:
Operating Voltage:
Speed
(RPM)
High
2000
Medium
1600
Low
1200
Note: The minimum voltage to start a 120mm TriCool™ fan is 5V. We recommend that
you set the fan speed switch to High if you choose to connect the fan(s) to a fan
control device or to the Fan-Only connector found on some Antec power
supplies. A fan control device regulates the fan speed by varying the voltage,
which may start as low as 4.5V to 5V. Connecting a TriCool™ fan set on Medium
or Low to a fan-control device may result in the fan not being able to start
because the already lowered voltage from the fan control device will be further
reduced by the TriCool™ circuitry below 5V.
120 x 25mm TriCool™ fan
12V
10.2V - 13.8V
Input
Air Flow
Current
0.24A
2.2 m³ / min
(Max.)
(79 CFM)
1.6 m³ / min
0.20A
(56 CFM)
1.1 m³ / min
0.13A
(39 CFM)
Static
Pressure
2.5mm-H2O
(0.10 inch-H2O)
1.5mm-H2O
(0.06 inch-H2O)
0.9mm-H2O
(0.04 inch-H2O)
10
Acoustic
Input
Noise
Power
30 dBA
2.9W
28 dBA
2.4W
25 dBA
1.6W
The
Hide quick links:
Advertisement
Table of Contents
