Network - Ipcam IPCC-9605E User Manual

Figure 4-3-4 Advance setting
File Import: Click , and choose .ifc file to upload and update.
Reboot after update. Please contact your supplier for the updating file.
Factory settings: Click "Reset" to set all parameter to factory default setting,
and you may choose "Maintain current IP" to keep the IP address, otherwise,
the IP address will be 192.168.1.18.
Reboot: Click "Reboot" and in 110s the system will finish rebooting.

4.3.2 Network

Network：Setting of Network parameter of Network、FTP、SMTP/HTTPS、
802.1X、QoS、IGMP、SIP、DDNS PORT.
２４