Chevrolet 2015 Captiva Sport Owner's Manual page 71

70 Infotainment System
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were last
connected. The radio will
attempt to connect to the last
connected device to the system.
To link to a different paired
phone, see Connecting to a
Different Phone later in this
section.
Pairing a Phone
Pairing is not allowed while the
vehicle is in motion.
1. Select Settings from the Home
Page, or say, Pair Phone after
starting a voice recognition
session.
2. Select Bluetooth Device List.
3. Select New Device (Phone).
A four or six-digit Personal
Identification Number (PIN)
appears on the display.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate the vehicle named in the
list on the cell phone. Follow the
instructions on the cell phone to
enter and confirm the PIN
provided in Step 3. After the PIN
is entered, the system prompts
you to indicate pairing is
successful. The name of the
paired device depends on the
device and how it is set up. The
radio will automatically use the
vehicle name. The system
responds with <Phone name>
has been successfully paired
after the pairing process is
complete.
6. If Yes is selected in Step 5, a
message will pop up on the
radio screen saying, Pairing
successful with <phone name>.
The connections may need to be
accepted to have access to your
Contacts and Text Messages.
7. If No is pressed in Step 5, a
message will pop up on the
radio screen saying that the
pairing was unsuccessful.
8. Repeat Steps 1 5 to pair
additional phones.
While the phone is connected, the
Bluetooth icon on the upper right
corner of the radio will be
highlighted and the signal strength
and battery life of the phone will be
displayed.
Note: The current connected phone
would have a checkmark in the box
to the left of the device.