Chevrolet 2015 Captiva Sport Owner's Manual page 60

Most voice commands, except for
voice keypad, can be completed in
a single command. If the task takes
more than one command to
complete, the first command would
be to indicate the kind of task that is
to be performed. The system will
reply, prompting dialog to help
speak the necessary information.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See Retained Accessory Power
(RAP) in the owner manual.
Using Voice Recognition
Voice recognition becomes available
once the system has been
initialized. Initialization takes place
when the ignition is turned on. This
may take a few moments.
0
1. Press / on the steering
wheel control to activate
voice recognition, or press the
voice recognition icon on the
infotainment touch screen on the
radio.
If voice recognition is
started, the lists and
controls are verbal and the
visual displays through the
radio. The commands may
then be touched or spoken.
2. The audio system mutes and the
system plays a prompt followed
by a beep.
3. Wait until after the beep
completes, then clearly speak
one of the commands described
in this section.
0
Press / to interrupt any voice
recognition. This will terminate
the prompt. The beep is heard
immediately, and a command
can be stated without having
to wait.
Infotainment System
There are two voice prompt modes
supported:
Long verbal prompts: The longer
prompts provide more
information regarding the
supported actions for that voice
recognition session.
Short prompts: The short
prompts provide simple setup
and action commands.
The voice prompt modes can be
changed in the Voice Recognition
Menu from the Settings icon on the
Home Page.
If a command is not heard during a
short period of time, the voice
recognition process times out.
59