Table of Contents
Advertisement
Step 3: Mount Your SC-Z56
To mount your SC-Z56 on the back of a monitor, please do the following:
1. Attach the mounting bracket to the back side of SC-Z56 using the 2 screws provided.
2. Next, use the provided screws (M4XL10) to attach the VESA mounting plate to the rear side of the monitor.
3. Finally, slide the SC-Z56's mounting bracket into the VESA mounting plate, as shown below:
NOTE
• Make sure the arrow stampings on the device are pointing in the same direction as
the arrows on the mounting bracket.
M4XL8*2 (Silver)
7
Setting Up Your SC-Z56
Positioning Your SC-Z56
Advertisement
Table of Contents
