1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Network Hardware
  5. FWS-2150
  6. User manual

Aaeon FWS-2150 User Manual

Network appliance platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
N e t w o r k Ap p l i a n c e
F W S - 2 1 5 0
FWS-2150
Desktop
Network Appliance Platform
1 2.5" Internal Disk Drive bay
1 Ultra ATA-100, 2 SATA I
5 LAN Ports
2 Type A USB Ports
FWS-2150 Manual 2nd Ed.
April 30, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FWS-2150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon FWS-2150

Summary of Contents for Aaeon FWS-2150

  • Page 1 F W S - 2 1 5 0 FWS-2150 Desktop Network Appliance Platform 1 2.5” Internal Disk Drive bay 1 Ultra ATA-100, 2 SATA I 5 LAN Ports 2 Type A USB Ports FWS-2150 Manual 2nd Ed. April 30, 2014...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Acknowledgments All other products’ name or trademarks are properties of their respective owners.  Award is a trademark of Award Software International, Inc. ...
  • Page 4 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Caution There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

  • Page 5: Packing List

    F W S - 2 1 5 0 Packing List Before you begin installing your card, please make sure that the following materials have been shipped:  FWS-2150  Quick Installation Guide  CD-ROM for manual (in PDF format) and drivers ...

  • Page 6: Table Of Contents

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Contents Chapter 1 General Information 1.1 Introduction ............1-2 1.2 Features .............. 1-3 1.3 Specifications ............1-4 1.4 General System Information .......
  • Page 7 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Chapter 3 Award BIOS Setup 3.1 System Test and Initialization ......3-2 3.2 Award BIOS Setup ..........3-3 Chapter 4 Driver Installation 4.1 Installation ............

  • Page 8: Chapter 1 General Information

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    F W S - 2 1 5 0 1.1 Introduction FWS-2150 adopts the VIA C7/ Eden Processor, up to 2.0GHz with 400/800MHz Front Side Bus. (or onboard VIA Eden ULV 500MHz, FSB400MHz). Moreover, the chipset is equipped with VIA CN700 +VT8237R.

  • Page 10: Features

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 1.2 Features Desktop 5 LAN Ports Network Appliance Platform VIA C7/ Eden CPU, Up to 2.0GHz 240-pin x 1 DDRII 400/533MHz Memory Support, Up to 1GB 10/100Base-TX Ethernet x 5 (2 Ports Bypass Function)

  • Page 11: Specifications

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 1.3 Specifications System Form Factor Desktop 5 LAN ports Network Appliance VIA C7/Eden CPU, up to 2.0GHz (FSB Processor 400/800MHz) onboard Eden ULV 500MHz (FSB 400MHz)
  • Page 12 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Active/Link LED x 5, LAN Speed LED x 5 Blue Color 60W AC/DC power adapter Power Supply 7”(W) x 9.84”...
  • Page 13 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Rear I/O panel USB port x 2, LAN port x 5, DB-9 connector x 1, Software Reset Switch x 1 Environmental 32°F ~ 104°F (0°C ~ 40°C) Operating Temp.

  • Page 14: General System Information

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 1.4 General System Information Front Panel Bypass LED Power LED Status LED 5 LAN LEDs HDD LED Rear Panel Reset Console port...

  • Page 15: Chapter 2 Quick Installation Guide

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 Chapter FWS-2150 Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of the user manual. For other chapters and further installation...

  • Page 16: Safety Precautions

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.1 Safety Precautions The installation is intended for technically qualified personnel who have experience installing and configuring system boards. The equipment can be installed in a restricted access location (RAL) only.

  • Page 17: Location Of Connectors

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.2 Location of Connectors Chapter 2 Quick Installation Guide...
  • Page 18 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Connectors on Rear Panel of FWS-2150 Chapter 2 Quick Installation Guide...

  • Page 19: Mechanical Drawing

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.3 Mechanical Drawing Chapter 2 Quick Installation Guide...
  • Page 20 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Chapter 2 Quick Installation Guide...

  • Page 21: List Of Jumpers

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Label Function Clear CMOS...

  • Page 22: List Of Connectors

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each board's connectors: Label Function...

  • Page 23: Setting Jumpers

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 24: Clear Cmos (Jp1)

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 2.7 Clear CMOS (JP1) Function Clear CMOS No Jumper (Default) 2.8 SM Bus (JP2) Function SM Bus No Jumper (Default) 2.9 CF Power Selection (JP3) Function +5V (Default) +3.3V...

  • Page 25: Usb Connector (Usb2)

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 N.C. 2.12 USB Connector (USB2) Signal Signal USBD1- USBD1+ USBD2+ USBD2- 2.13 Keyboard and Mouse Connector (CN1) Signal Signal KB_DATA KMVCC KB_CLK MSDAT MSCLK 2.14 VGA Connector (CN2) Signal Signal VGA R...

  • Page 26: Installing The Hard Disk Drive

    Ne tw ork Ap p lia nce F W S - 2 1 5 0 VGA VS VGA CLK N.C. 2.15 Installing the Hard Disk Drive Step 1: Unscrew the upper cover and isolate the cover from the chassis Note: Push and remove the upper cover until see the screw on the HDD Step 2: Take out the Hard Disk Drive Case from the chassis 2-12 Chapter 2 Quick Installation Guide...
  • Page 27 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Step 3: Turn the screw to open the HDD case Step 4: Fasten the four rubber feet Step 5: Fasten the four screws of the Hard Disk Drive Bracket 2-13 Chapter 2 Quick Installation Guide...
  • Page 28 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Step 6: Put the HDD with cable onto the HDD Bracket Step 7: Close the upper bracket of the HDD case and make sure the rubber feet are locked by the flutes on the brackets 2-14 Chapter 2 Quick Installation Guide...
  • Page 29 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Step 8: Fasten the screw conversely to lock the HDD Step 9: Plug the IDE or SATA cable in the IDE or SATA socket on the mainboard 2-15 Chapter 2 Quick Installation Guide...
  • Page 30 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Step 10: Insert the HDD to the chassis horizontally and lock the HDD case Step 11: Close and screw the upper cover of the chassis 2-16 Chapter 2 Quick Installation Guide...
  • Page 31 Ne tw ork Ap p lia nce F W S - 2 1 5 0 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板...

  • Page 32: Chapter 3 Award Bios Setup

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Chapter Award BIOS Setup Chapter 3 Award BIOS Setup 3-1...
  • Page 33 3. The CMOS memory has lost power and the configuration information has been erased. The FWS-2150 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.
  • Page 34 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 35 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals.
  • Page 36 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter.

  • Page 37: Chapter 4 Driver Installation

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 38 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 The FWS-2150 comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 39 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 4.1 Installation: Insert the FWS-2150 CD-ROM into the CD-ROM drive and install the drivers from Step 1 to Step 3 in order. Step 1 – Install VIA 4 IN 1 Driver Click on the Step 1-VIA 4 IN 1 folder and double click on the Setup.exe...

  • Page 40: Appendix A Programming The Watchdog Timer

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 41: Programming

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 A.1 Programming FWS-2150 utilizes ITE 8712 chipset as its watchdog timer controller. ( K version ) Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 42 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
  • Page 43 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Description Reserved Returns to the Wait for Key state. This bit is used when the configuration sequence is completed. Resets all logical devices and restores configuration registers to their power-on states.

  • Page 44: Ite8712 Watchdog Timer Initial Program

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 WatchDog Timer Time-out Value (LSB) Register (Index=73h, Default=00h) Description WDT Time-out value 7-0 WatchDog Timer Time-out Value (MSB) Register (Index=74h, Default=00h) Description WDT Time-out value 15-8...
  • Page 45 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
  • Page 46 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Exit_Configuration_Mode ENDP Check_Chip PROC NEAR...
  • Page 47 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Need_Initial: Not_Initial: Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR...
  • Page 48 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al Superio_Set_Reg endp.Set_Logic_Device proc near Set_Logic_Device proc near push ax push cx...
  • Page 49 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 03h: IRQ3 02h: not valid 01h: IRQ1 00h: no interrupt selected A-10 Appendix A Programming the Watchdog Timer...

  • Page 50: Appendix B I/O Information

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 Appendix I/O Information Appendix B I/O Information...

  • Page 51: I/O Address Map

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 B.1 I/O Address Map Appendix B I/O Information...

  • Page 52: Memory Address Map

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 B.2 Memory Address Map Appendix B I/O Information...

  • Page 53: Irq Mapping Chart

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 B.3 IRQ Mapping Chart B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 54: Appendix C Standard Firewall Platform Setting

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 A ppendix Standard Firewall Platform Setting Appendix C Standard Firewall Platform Setting...

  • Page 55: Status Led Sample Code

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 C.1 Standard Firewall Platform Setting Status LED Disable I/O PORT B2h set bit 2 and bit 3 to 0, I/O PORT FAh set bit 0-7 to 0 Red LED ON I/O PORT B2h set bit 2 to 1,...
  • Page 56 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 blink out dx,al [RED LED ON] mov dx,B2h ;( IO_PORT = B2h) in al,dx or al,00000100b ;GPIO32 bit2 out dx,al mov dx,FAh ;( IO_PORT = FAh)
  • Page 57 N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 [GREEN LED ON] mov dx,B2h ;( IO_PORT = B2h) in al,dx or al,00001000b ;GPIO33 bit3 out dx,al mov dx,FAh ;( IO_PORT = FAh) in al,dx...

  • Page 58: Lan Bypass Mode Sample Code

    N e t w o r k Ap p l i a n c e F W S - 2 1 5 0 C.3 LAN Bypass Mode Sample Code LAN BYPASS MODE Sample code [Disable Function] mov dx,B2h ;( IO_PORT = B2h) in al,dx or al,00000001b ;set bit 0-->Low out dx,al...

  • Page 59: Console Redirection

    This section will tell you how to use the console redirection. 1. Please insert console cable between on FWS-2150 and remote client system. 2. Setup BIOS in FWS-2150 BIOS >>...
  • Page 60 Step5 - Select Baud Rate >> 19200, Flow control >> None, Data bit >>8, Parity cheek >> None, Stop bit>>1 4. Power on FWS-2150 and it will display the BIOS information on the client system. Appendix C Standard Firewall Platform Setting...

Table of Contents