Advertisement

Quick Links

N e t w o r k V i d e o R e c o r d e r
N V R - 6 3 0 0 S
NVR-6300S
Network Video Recorder
3.5" Hot-Swappable SATA HDD Tray x 12
2.5" HDD Tray x 1
Gigabit Ethernet x 2
USB3.0 x 4, USB2.0 x 3
VGA x 1, DisplayPort x 1, HDMI x 1
NVR-6300S Manual 1st Ed.
August 4, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR-6300S and is the answer not in the manual?

Questions and answers

Summary of Contents for Aaeon NVR-6300S

  • Page 1 Network Video Recorder 3.5" Hot-Swappable SATA HDD Tray x 12 2.5” HDD Tray x 1 Gigabit Ethernet x 2 USB3.0 x 4, USB2.0 x 3 VGA x 1, DisplayPort x 1, HDMI x 1 NVR-6300S Manual 1st Ed. August 4, 2014...
  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Acknowledgments All other products’ name or trademarks are properties of their respective owners.
  • Page 4: Packing List

    Before you begin installing your card, please make sure that the following materials have been shipped:  1 DVD-ROM for Manual (in PDF Format) and Drivers  1 NVR-6300S If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
  • Page 5: Table Of Contents

    2.1 Locations of Jumpers and Connectors of the Main Board ................2-2 2.2 Mechanical Drawing of the Main Board ....2-3 2.3 Mechanical Drawing of NVR-6300S ......2-4 2.4 List of Jumpers of the Main Board ......2-5 2.5 List of Connectors of the Main Board ......2-5 2.6 Setting Jumpers ............
  • Page 6 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter 4 Driver Installation 4.1 Installation ..............4-3 Appendix A I/O Information A.1 I/O Address Map ............
  • Page 7 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅...
  • Page 8: Chapter 1 General Information

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter General Information 1- 1 Chapter 1 General Information...
  • Page 9: Introduction

    It deploys two LAN ports that consist of 10/100/1000Base-TX Ethernet RJ-45 ports. This NVR-6300S supports up to 12 3.5" hot-swappable HDD trays and one 2.5” SATA HDD Tray x 1, Slim Optical Disk Drive x 1. Moreover, the flexible expansion interfaces feature one PCI-E[x16] and one PCI-E[x4] (signal [x2]).
  • Page 10: Features

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 1.2 Features  LGA 1150 Socket for 22nm Intel® Core™ i3/i5/i7 Processor, Max.
  • Page 11: Specifications

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 1.3 Specifications System ®  CPU Intel LGA Socket 1150 with Intel Core™...
  • Page 12: Usb3.0 X 4, Usb2.0 X

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S  Expansion Slot PCI-E [x16] x 1 PCI-E [x4] x 1 (Signal [x2]) ...
  • Page 13: Serial Port

    Audio Jack x 3 (Mic-in/ Line-in/  Audio Line-out)  Display Port VGA x , DisplayPort x 1, HDMI x 1 Remark: When operating 4K*2K monitor, please use HDMI port ONLY since NVR-6300S has compatible limitation on Display Port. 1- 6 Chapter 1 General Information...
  • Page 14: Chapter 2 Hardware Installation

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter Hardware Installation Chapter 2 Hardware Installation...
  • Page 15: Board

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.1 Locations of Jumpers and Connectors of the Main Board Component side Chapter 2 Hardware Installation...
  • Page 16: Mechanical Drawing Of The Main Board

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.2 Mechanical Drawings of the Main Board Component side Chapter 2 Hardware Installation...
  • Page 17: Mechanical Drawing Of Nvr-6300S

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.3 Mechanical Drawings of NVR-6300S Chapter 2 Hardware Installation...
  • Page 18: List Of Jumpers Of The Main Board

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.4 List of Jumpers of the Main Board The board has a number of jumpers that allow you to configure your system to suit your application.
  • Page 19 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S USB5 USB3+USB2 Connector AUDIO1 Audio Connector DIMM1 DDR3 DIMM Slot DIMM2 DDR3 DIMM Slot DIMM3 DDR3 DIMM Slot...
  • Page 20: Setting Jumpers

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.
  • Page 21: Clear Cmos (Cmos)

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.7 Clear CMOS (CMOS1) CMOS1 Function Protected (Default) Clear 2.8 Auto Power Button (JP1) F u n c t i o n Power ON by Button (Default) Auto Power ON...
  • Page 22: Usb3.0 Port Pin Header

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S USBN(0) USBN(1) USBP(0) USBP(1) 2.12 USB3.0 Port PIN Header Signal Signal USB3_RX1_DN_C USB3_RX1_DP_C USB3_RX2_DN_C...
  • Page 23: Installing The Slim Optical Drive And 3.5" Hard Disk

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 2.13 Installing the Slim Optical Drive and 3.5” Hard Disk Drive Step 1: Unfasten the screws on right side and left side Step 2: Thumb finger touch downward and then push back the rear back cover...
  • Page 24 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Installation the slim optical drive Step 1: Use key to open the front bezel Step 2: Release the four screws 2-11 Chapter 2 Hardware Installation...
  • Page 25 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 3: Pull back 5-tray HDD bay Step 4: Remove the slim optical drive bay by pressing buttons on both sides 2-12 Chapter 2 Hardware Installation...
  • Page 26: Drive

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 5: push slim optical drive in to the slim drive bay Step 6: use a magnetic screwdriver to secure three screws the optical drive 2-13...
  • Page 27 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Installation the 3.5” Hard Disk Drive Step1: insert the 3.5” hard drive to the HDD tray Step 2: Fasten the four screws to secure the HDD with the HDD tray 2-14 Chapter 2 Hardware Installation...
  • Page 28 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 3: Slide the HDD tray into a HDD bay Step 4: Push the lever to latch the HDD tray 2-15 Chapter 2 Hardware Installation...
  • Page 29 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 5: Use the key to lock the front bezel 2-16 Chapter 2 Hardware Installation...
  • Page 30: Chapter 3 Ami Bios Setup

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter BIOS Setup Chapter 3 AMI BIOS Setup...
  • Page 31: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The NVR-6300S CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.
  • Page 32: Ami Bios Setup

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 33: Setup Menu

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Setup Menu Main Chapter 3 AMI BIOS Setup 3-4...
  • Page 34 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 35 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S S5 RTC Wake Settings Chapter 3 AMI BIOS Setup 3-6...
  • Page 36 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Wake system with Fixed Time Options Summary: Wake system with Fixed Disabled Default Time...
  • Page 37 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S select 0-23 For example enter 3 for 3am and 15 for 3pm Wake up minute 0 (Default) select 0-59 for minute of an hour.
  • Page 38 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Wake system with Dynamic Time Options Summary: Wake system with Dynamic Disabled Default Time...
  • Page 39 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S ACPI Settings Options Summary: Suspend mode Supend Disabled S3 (Suspend to RAM) Default Select the ACPI state used for System Suspend Chapter 3 AMI BIOS Setup 3-10...
  • Page 40 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Trusted Computing Options Summary: Security Device Support Disabled Default Enabled Enable or Disable BIOS support for security device. Chapter 3 AMI BIOS Setup 3-11...
  • Page 41 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S CPU Configuration Options Summary: Intel Virtualization Disabled Technology Enabled Default En/Disable Intel Virtualization Technology. Turbo Mode Disabled Enabled...
  • Page 42 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S SATA Configuration Options Summary: SATA Controller(s) Disabled Enabled Default En/Disable SATA Controller(s) SATA Mode Selection AHCI Default...
  • Page 43 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S PCH-FW Configuration Chapter 3 AMI BIOS Setup 3-14...
  • Page 44 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S AMT Configuration Options Summary: Intel AMT Disabled Enabled Default Enable/Disable Intel(R) Active Management Technology BIOS Extension. Un-Configure ME Disabled Default...
  • Page 45: Usb Configuration

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S USB Configuration Options Summary: Legacy USB Support Enabled Default Disabled Auto Enables BIOS Support for Legacy USB Support.
  • Page 46: Super Io Configuration

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Super IO Configuration Options Summary: Serial Port 1 Disabled Configuration Enable Default Enabled or Disabled Serial Port(COM).
  • Page 47 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Serial Port 1 Configuration Chapter 3 AMI BIOS Setup 3-18...
  • Page 48 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Serial Port 2 Configuration Chapter 3 AMI BIOS Setup 3-19...
  • Page 49 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Options Summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable corresponding serial port. Change Settings Auto Default...
  • Page 50 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Pc Health Status Chapter 3 AMI BIOS Setup 3-21...
  • Page 51 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Smart Fan Mode Configuration Options Summary: CPU Fan Mode Full Mode Manual Mode by PWM Auto Mode by PWM Default...
  • Page 52 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S SYS Fan 2 Mode Full Mode Default Manual Mode by PWM Auto Mode by PWM SYS Fan 2 Control Mode.
  • Page 53 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S S5 RTC Wake Settings Chapter 3 AMI BIOS Setup 3-24...
  • Page 54 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Options Summary: Wake system with Fixed Disabled Default Time Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified.
  • Page 55 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chipset Chapter 3 AMI BIOS Setup 3-26...
  • Page 56 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S System Agent (SA) Configuration Options Summary: PCIe x16 port Speed Auto Default Gen1 Gen2...
  • Page 57 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Select which of IGFX/PEG/PCI Graphics device should be Primary Display or select SG for Switchable Gfx.
  • Page 58 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Graphics Configuration Options Summary: Internal Graphics Auto Disabled Default Enabled Keep IGD enabled based on the setup options. DVMT Total Gfx Memory 128M 256M Default...
  • Page 59 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Display HDMI Display Port Select the video Device which will be activated during POST. Chapter 3 AMI BIOS Setup 3-30...
  • Page 60 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Memory Information Chapter 3 AMI BIOS Setup 3-31...
  • Page 61 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Boot Options Summary: Quiet Boot Disabled Enabled Default En/Disable showing boot logo. Launch I217LM PXE Disabled Default...
  • Page 62 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Security Chapter 3 AMI BIOS Setup 3-33...
  • Page 63 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Options summary Set User Password/ Not set Set Administrator Password You can install a Master and User password. Before booting to OS, HDD will be set to frozen state.
  • Page 64 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Save & Exit Chapter 3 AMI BIOS Setup 3-35...
  • Page 65 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Options Summary: Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults...
  • Page 66: Chapter 4 Driver Installation

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 67 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S The NVR-6300S comes with an AutoRun DVD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 68 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S 3.1 Installation Insert the NVR-6300S DVD-ROM into the DVD -ROM drive and install the drivers from Step 1 to Step 9 in order. Step 1 – Install Chipset Driver Click on the Step1 - Chipset folder and double click on the SetupChipset_10.0.14.exe file...
  • Page 69 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 4 – Install LAN Driver Click on the Step4 - LAN folder and select the OS your system is Double click on the .exe file located in each OS folder Follow the instructions that the window shows...
  • Page 70 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Step 8 – Install IRST Driver Click on the Step8 - IRST folder and double click on the SetupRST_12.9.0.1001.exe file Follow the instructions that the window shows The system will help you install the driver automatically...
  • Page 71: Appendix A I/O Information

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Appendix I/O Information Appendix A I/O Information...
  • Page 72: I/O Address Map

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S A.1 I/O Address Map Appendix A I/O Information...
  • Page 73 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Chapter A I/O Information...
  • Page 74: Memory Address Map

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S A.2 Memory Address Map Appendix A I/O Information...
  • Page 75: Irq Mapping Chart

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S A.3 IRQ Mapping Chart Chapter A I/O Information...
  • Page 76 N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S Appendix A I/O Information...
  • Page 77: Dma Channel Assignments

    N e t w o r k V i d e o R e c o r d e r N V R - 6 3 0 0 S A.4 DMA Channel Assignments Chapter A I/O Information...

Table of Contents