DCI LLC DigiTrak F Series Operator's Manual page 2

D
IGITAL
403-2510-00-A, Apr 2015
© 2015 by Digital Control Incorporated. All rights reserved.
Trademarks
The DCI logo, DigiTrak
are trademarks of Digital Control Incorporated.
Patents
U.S. and foreign patents apply to the product covered by this manual. For details, please visit
www.DigiTrak.com/patents.
Limited Warranty
All products manufactured and sold by Digital Control Incorporated (DCI) are subject to the
terms of a Limited Warranty. A copy of the Limited Warranty is included at the end of this
manual; it can also be obtained by contacting DCI Customer Service, 425-251-0559 or
800-288-3610, or on DCI's website, www.DigiTrak.com.
Important Notice
All statements, technical information, and recommendations related to DCI products are
based on information believed to be reliable. However, DCI does not warrant or guarantee
the accuracy or completeness of such information. Before using any DCI product, the user
should determine the suitability of the product for its intended use. All statements herein refer
to DCI products as delivered by DCI for use with horizontal directional drilling in the ordinary
course, and do not apply to any user customizations, third party applications developed for
Aurora, third-party products, or any usage of the DCI product outside of the ordinary course.
Nothing herein shall constitute a warranty by DCI nor will anything herein be deemed to
modify the terms of DCI's existing Limited Warranty applicable to all DCI products. DCI may
update or correct the information in this manual from time to time. You may find the most
recent version of this manual on DCI's website, www.DigiTrak.com. Under Service &
Support, click Documentation and select from the Manuals drop-down menu.
Compliance Statement
This equipment complies with Part 15 of the Rules of the FCC and with Industry Canada
license-exempt RSS standards and with Australia Class License 2000 for LIPD (low
interference potential devices). Operation is subject to the following two conditions: (1) this
equipment may not cause harmful interference, and (2) this equipment must accept any
interference received, including interference that may cause undesired operation. DCI is
responsible for FCC compliance in the United States: Digital Control Incorporated, 19625
62nd Ave S, Suite B103, Kent WA 98032; phone 425-251-0559 or 800-288-3610.
Changes or modifications to any DCI equipment not expressly approved and carried out by
DCI will void the user's Limited Warranty and the FCC's authorization to operate the
equipment.
CE Requirements
Directive and may not be legal to operate or require a user license to operate in some
countries. The list of restrictions and the required declarations of conformity are available on
DCI's website, www.DigiTrak.com. Under Service & Support, click Documentation and
select from the CE Documents drop-down menu.
ii
C I
ONTROL NCORPORATED
® ®
, are U.S. registered trademarks and F Series™ and FSD™
, and F5
DigiTrak receivers are classified as Class 2 radio equipment per the R&TTE

FBC Operator's Manual
DigiTrak