Garmin GPSMAP 4008 Owner's Manual page 61

Configuring the Navigation Data Bar
You should show the navigation data bar before you configure it
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Select Menu > Data Bars > Navigation > Data Bar Setup.
4. Complete an action:
• Select Route Leg. Select on to show waypoint velocity made good (VMG) when navigating a route or
an Auto Guidance line
• Select Next turn > Distance to show next turn data based on distance.
• Select Next turn > time to show next turn data based on time.
• Select Destination, and select Distance, time to Destination, or Arrival to indicate how the
destination data appears.
Fishing, Fuel, and Sailing Data Bars
Data Bar Data Shown
Fishing Depth, water temperature, and water speed
Fuel Fuel rate, remaining fuel, range, and fuel economy
Sailing Water speed, wind speed, wind angle, and wind velocity made good
Showing the Fishing, Fuel, or Sailing Data Bars
The fishing, fuel, and sailing data bars appear in a row across the bottom of the chart. Only one of these three
data bars can appear at a time.
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Complete an action:
• Select Menu > Data Bars > Fishing > on.
• Select Menu > Data Bars > Fuel > on.
• Select Menu > Data Bars > Sailing > on.
Note: When you show any one of these three data bars, the other two data bars are hidden automatically.
Setting True or Apparent Wind for the Sailing Data Bar
You should show the sailing data bar before you configure it
You can select the type of wind data that appears in the sailing data bar.
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Select Menu > Data Bars > Sailing.
4. Complete an action:
• Select Wind > Apparent to show the flow of air experienced while on a boat in motion.
• Select Wind > true to show the flow of air experienced while on a stationary boat.
GPSMAP 4000/5000 Series Owner's Manual
®
(page 58).
(page 56).
(page 57).
Device Configuration
57