Garmin GPSMAP 4008 Owner's Manual page 60

Device Configuration
Data Bars
Data bars appear on specific charts and 3D chart views, radar views, and combination screens. The data bar
➊
for each chart or one 3D chart view must be configured separately.
➊
Perspective 3D with Data Bars
Several data bars are available. You can select the data fields to be shown within each data bar. When data bars
numbers are displayed on the chart, the navigation inset is shown during navigation.
Showing the Cruising Data Bar
The cruising data bar appears while you are navigating to a destination. It shows GPS speed, GPS heading,
depth, and GPS position data.
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Select Menu > Data Bars > Cruising > on.
Configuring the Cruising Data Bar
You should show the cruising data bar before you configure it (page 56).
The cruising data bar is divided into four sections, and each section appears in a different corner of the chart.
You can select the type of data that appears in each section of the data bar.
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Select Menu > Data Bars > Cruising > Data Bar Setup.
4. Select top Left.
5. Select the type of data to appear in the top left section of the data bar.
6. Repeat steps 4 and 5 for the top Right, Bottom Left, and Bottom Right sections of the data bar.
Showing the Navigation Data Bar
The navigation data bar appears in a row across the top of the chart. The navigation data bar can show distance
to destination, arrival, off-course, bearing, and next turn data.
1. From the Home screen, select Charts.
2. Select a chart or a 3D chart view.
3. Select Menu > Data Bars > Navigation.
4. Select on or Auto.
56 GPSMAP 4000/5000 Series Owner's Manual
®