Connecting Web Viewer - Samsung SRN-470D User Manual

CONNECTING WEB VIEWER

1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
`
You must have specified the IP address in "Network >
Connection Mode".
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
For more information, refer to "Network Configuration > DDNS". (Page 76)
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
`
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
`
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
`
M
It allows up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
The default ID of the admin account is "admin", and the default password is "4321".
`
Password of the Admin and general users can be changed in <Permission Management> menu of the NVR.
`
Normal users should have set <Webviewer> under <Restriction on Network Access> to "Use" before connecting to the
Web Viewer. (Page 48)
`
All settings are applied by the NVR's settings.
3. Click <Install ActiveX Control...>.
4. Click <Install>.
5. You may have "Windows Security Alert" that attempts to
block this with the Windows Firewall. In that case, click
<Unblock> to start Web Viewer.
6. Installation is complete.
Now you can see the main screen of Live Viewer.
English _87