Time; 2-2.1 Manual - AFi SM10P User Manual

2-2 Time

This page configure the switch Time. Time configure is including Time Configuration and NTP
Configuration

2-2.1 Manual

The switch provides manual and automatic ways to set the system time via NTP. Manual
setting is simple and you just input "Year", "Month", "Day", "Hour", "Minute" and "Second"
within the valid value range indicated in each item.
Web Interface
To configure Time in the web interface:
1. Click Time , Manual.
2. Specify the Time parameter in manual parameters.
3. Click Save.
Figure 2-2.1: The time configuration
Parameter description:
Clock Source:

To click what clock source for the SM10P. You can select "Use local
Settings" or "Use NTP Server" for SM10P time clock source.
Local Time:

Show the current time of the system.
Time Zone Offset:

Provide the time zone offset relative to UTC/GMT. The offset is given in minutes
east of GMT. The valid range is from -720 to 720 minutes
Daylight Saving:

Daylight saving is adopted in some countries. If set, it will adjust the time lag
or in advance in unit of hours, according to the starting date and the ending
date. For example, if you set the day light saving to be 1 hour. When the time
passes over the starting time, the system time will be increased one hour after
one minute at the time since it passed over. And when the time passes over the
ending time, the system time will be decreased one hour after one minute at
the time since it passed over.
The switch supports valid configurable day light saving time is –5 ~ +5 step
one hour. The zero for this parameter means it need not have to adjust current
9 Publication date: Mar., 2012
Revision A1