Samsung SNB-6011 User Manual page 86

setup screen
Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1. From the Setup menu, select the
<Event (
2. Click <Storage>.
3. Select a device to save data in.

M
If your device is properly recording data, it
will display "Recording".

If you see an "Error" message, check the
following:
Check the storage to see if it is
-
connected to the device.
Check the files in the storage to see if
-
they are damaged.
Check the storage to see if they are
-
physically damaged.

If the "Error" message does not disappear after following the instructions, format the Micro SD
card.
After formatting, if the error message still remains, replace the Micro SD card.

If you remove the Micro SD card without changing a button to 'off' position in settings or if you
connect a camera to an unstable power source, the Micro SD card may be damaged.
86_ setup screen
)> tab.