Installing The Logs - Superior VRE4336ZEN Installation Instructions Manual

WARNING
DO NOT OPERATE THE FIREPLACE
FOR ANY EXTENDED PERIOD OF TIME
WITHOUT THE VOLCANIC STONE IN
PLACE. THE PAN CAN OVER HEAT AND
MAY WARP AND THE FIREPLACE MAY
SHUT OFF AUTOMATICALLY.

INSTALLING THE LOGS

After verifying that the fireplace operates
properly, replace the cover and set the bottom
refractory components in place.
Use two (2) bags of volcanic stone to fill the
bottom of the burner tray to completely cover
the burner tube. Level the volcanic stone evenly.
Place the rear log approximately centered as
shown in Figure 14.
Place the base log approximately as shown in
Figure 15.
The remaining logs can be placed across the
rear and base log approximately as shown in
Figure 16. The exact position of these logs is
not critical. Due to the nature of an outdoor
environment, the flame will never be strictly
controlled. You may need to reposition the
logs to get the effect you find most desirable.
A more detailed description is provided in the
Care and Operation manual.
CAUTION: LOGS GET HOT WHILE THE FIRE-
PLACE IS IN OPERATION. DO NOT ATTEMPT
TO ADjUST OR MOVE THE LOGS WHILE THE
FIREPLACE IS HOT.
12
Rear Log
Figure 14
Base Log
Figure 15
Top Center Log
Top Left Log
Figure 16
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Top Right Log