Zte Zmax Quick Start Manual page 31

NOTE: You must have qualifying service on your
account in order to use the Mobile HotSpot.
1. From the Home screen, touch
2. Check Mobile HotSpot zone to turn it on.
3. Edit the Network SSID field and then create
a new Network SSID name.
4. Touch Frequency band field to select the
frequency.
5. Touch Channel field to select the channel.
6. Verify the Security field is set to WPA2 PSK.
7. Enter a new password then write it down.
8. Enable the Broadcast network name(SSID)
field if you would like to broadcast your SSID
name to nearby devices.
9. Touch Save to store the new settings.
10. Confirm the Mobile HotSpot active icon
appears at the top of the screen.
NOTE: By default, during the initial setup process,
the connection is not secure. It is recommended
that you maintain a secure connection by using a
password for communication.
NOTE: Using your 4G service and Mobile
HotSpot drains your phone's battery at a much
faster rate than when using any other feature
combination. The best way to keep using the
phone as a HotSpot is to have it connected to a
power supply.
29
> .