Remote Control; Remote Control Buttons And Functions - Samsung HW-J550 User Manual

REMOTE CONTROL

REMOTE CONTROL BUTTONS AND FUNCTIONS

Soundbar is a Samsung proprietary name.
●
Operate the TV using the TV's remote control.
●
SOURCE
Press to select a source connected to the Soundbar.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,]
buttons to adjust the Treble, Bass volume from -6 to +6.
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the SOUND CONTROL button to sync the
audio with the video. Use the [,] buttons to set the audio delay
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,
1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be
adjusted to a setting between -6 and +6.
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Optical
source via the Optical jack so it turns on automatically when you turn
on your TV.
(Auto Power Link : Default OFF, ON-ANYNET+ / OFF-POWER LINK or
OFF-ANYNET+ / ON-POWER LINK ). The Anynet+ function lets you
control the Soundbar with the remote from an Anynet+ compatible
Samsung TV. The Soundbar must be connected to the TV via an HDMI
cable.
* Anynet+:Press the AUTO POWER button to turn the Anynet+
function on or off.
WOOFER
You can control the woofer volume.
Press the Woofer button, and then press the [,] button to increase
or decrease the subwoofer volume. You can select SW (-12, -6,-5,-4,-
3,-2,-1, 0,+1,+2,+3,+4,+5,+6).
9
REMOTE CONTROL