INSTALLING THE BRACKET WITHOUT REFERRING TO THE
WALL-MOUNT INSTALLATION GUIDE
(5 cm) or more
1. Place Wall Mount L on the desired wall surface parallel to the floor as shown above.
Mark the location of the screw holes on the wall. Drill holes for the screws at the places
you have marked.
2. Match the screw holes on Wall Mount L to the screw holes on the wall, and then screw
one screw through the hole in its right end. Tighten the screw until it is firmly fixed to
the wall.
3. Place Wall Mount R on the desired wall surface parallel to the floor and aligned with Wall Mount L
as shown above. Mark the location of the screw holes on the wall. Drill holes for the screws at the
places you have marked.
4. Match the screw holes on Wall Mount R to the screw holes on the wall, and then screw
one screw through the hole in its right end. Tighten the screw until it is firmly fixed to
the wall.
If you are mounting the Wall Mounts beneath the TV, make sure to position the
●
mounts 2 or more inches (5cm) below the TV and to align the mounts with the
center of the TV as shown above.
5. Insert screws through the remaining holes, and then tighten.
2 inches
4.6 inches
(11.6 cm)
Minimum 9.4 ~ 9.7 inches
(23.9 ~ 24.6cm)
13
2 inches
(5 cm) or more
5.1 inches
(13 cm)
CONNECTIONS