Display - Pioneer VSX-529-k Operating Instructions Manual

1
1
15 ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned ON, the display will go dark
16 iPod iPhone DIRECT CONTROL
Change the receiver's input to the iPod and enable iPod
operations on the iPod (page 29).
17
iPod/iPhone terminals
Use to connect your Apple iPod/iPhone or USB mass storage
device as an audio source (page 22).
18
HDMI INPUT connector
Use for connection to a compatible HDMI device (Video
camera, etc.) (page 23).

Display

19
PHASE
Lights when the Phase Control is switched on.
20
AUTO
Lights when the Auto Surround feature is switched on
(page 37).
21
Tuner indicators
RDS – Lights when an RDS broadcast is received
(page 36).
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode (page 35).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
22
Speaker indicators
Shows if the speaker system is on or not
SPA means the speakers are switched on.
SP means the speakers are switched off.
23
Sleep timer indicator
Lights when the receiver is in sleep mode
24
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
25
Character display
Displays various system information.
(page 38).
26
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing
27
Dolby Digital indicators
D – Lights when a Dolby Digital encoded signal is
detected.
D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
HD – Lights when a source with Dolby TrueHD
encoded audio signals is detected.
PLII – Lights to indicate
(see Listening in surround sound on page 37
this).
28
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround on page 38
more on this).
29
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
(page 9).
is not provided.
30
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (page 38).
(page 11).
(page 37).
Pro Logic II decoding
for more on
for
10
Controls and displays
4
9
58