This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body (Used figure are KD-APD39)
3.1.1 Removing the Bottom chassis (See Fig.1)
(1) Remove the four screws A, two screws B attaching the
heat sink.
(2) Remove the one screw C attaching the Bottom chassis.
(3) Slide to backward, and then take out the Bottom chassis.
3.1.2 Removing the Front chassis (See Fig.2, 3)
(1) Remove the two screws D attaching the Front chassis.
(See Fig.2)
(2) Remove the two screws E attaching the both side of Front
chassis. (See Fig.3)
(3) Disengage four hooks a engaged both side of Front chassis.
(See Fig.3)
1-10 (No.MA392<Rev.002>)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
A
A
B
B
C
Fig.1
Fig.2
a
hook
a
hook
Fig.3
A
A
D
E