Advertisement
Caring For Your SonicDermabrasion
Micro-Fiber Bristle Brush Heads
1. Clean Brush Heads after every use. Remove Brush Heads,
rinse clean with warm water and mild soap to remove any
build-up that may have accumulated, shake off excess water
and towel dry – or gently rub the Brush Head against a towel
for 5-10 seconds while the SonicDermabrasion® is on.
Do not attach wet brush heads to handle while charging.
2. Do not allow liquid cleansers or moisturizers to accumulate
on Brush Heads.
Facial Brush Handle
1. Do not use abrasive cleaners or chemicals to clean any part
of the SonicDermabrasion.
2. Clean handle with damp cloth – using mild detergent or warm
water and towel dry immediately.
Countertop Stand
1. Use mild detergent or warm water and towel dry immediately.
*DO NOT IMMERSE CHARGING ADAPTOR IN WATER. ADAPTOR
CONNECTOR MUST REMAIN DRY AT ALL TIMES.
Replace Brush Heads as needed– they can be purchased from
your retailer or online at www.pretika.com.
Customer Service
For questions or assistance relating to the use of this product–
or for information on all of the innovative Beauty, Skin Care, Spa
and Personal Care products manufactured by Pretika, contact our
Customer Service Team at 949-481-8818 Phone (8:00 AM to 5:00 PM,
Paci c Standard time, Monday through Friday), 949-481-8828 Fax
or by email at customerservice@pretika.com.
®
Advertisement
