LG B2050 User Manual page 65

- Bearer
You can set the bearer data service.
• Data
• GPRS
- Data settings
Appears only if you select Data Settings as a
Bearer / service.
IP address : Enter the IP address of the WAP
gateway you want.
Dial number : Enter the telephone number to dial to
access your WAP gateway.
User ID : The users identity for your dial-up server
(and NOT the WAP gateway).
Password : The password required by your dial-up
server (and NOT the WAP gateway) to
identify you.
Call type : Select the type of data call : Analogue of
Digital (ISDN)
Call speed : The speed of your data connection ;
9600 or 14400
Linger time : You need to enter timeout period.
- GPRS settings
The service settings are only available when GPRS
is chosen as a bearer service.
IP address : Input the IP address of the WAP
APN : Input the APN of the GPRS.
User ID : The users identify for your APN server.
Password : The password required by your APN
- Connection type
The options for connection type are Temporary or
Continuous and depend on the gateway you are
using.
Continuous
A confirmed delivery mechanism but generates
more network traffic.
Temporary
A non-confirmed (connectionless) service.
B2050 User Guide
After entering that, the WAP
navigation service will be unavailable
if any data is not input or transferred.
gateway you access.
server.