Lubrication; Battery And Fuse - Skyteam ST 50-6 Operation Instruction Manual

KEY: C=Check, CL=Clean, A=Adjustment, R=Replace, O=Oil
NOTES:
(1)This chart is for reference of periodic maintenance, or ideally more checks and maintenance should
be carried out.
(2)Check item in the chart contains check, adjusting, clean, replace and oil.
(3)Ask a professional repairer to do some items in the chart which can't do by yourself.
(4) The inlet and outlet valves should be checked after every 1,500km. The valve clearance in cold state
is 0.05mm.
(5)The wear limit of brake shoe's brake pad is 1.5mm, the brake shoes should be replaced as a set.
(6)Check the swing situation of front and rear wheels often. If wheels swing seriously, find out the reasons
and get rid of them.
Periodical checks may reveal one or more parts that may need replacement. Whenever replacing
parts on your motorcycle, it is recommended that you use genuine Skyteam replacement parts or their
equivalent. Whenever you are an expert or do it yourself mechanics, Skyteam recommends that those
items on the check chart marked with an asterisk(*), be performed by your authorized Skyteam dealer
or qualified service personnel. You may perform the unmarked items easily by referring to the instructions
NOTE
28

LUBRICATION

The lubrication is very important for ensuring the
ability to maneuver all movable parts and prolong
the service life of motorcycle. After riding in wet or
rainy condition or at throttle fully opened, lubricating
all parts of motorcycle is required.
The main points to be lubricated are: Drain chain,
brake cable, front brake grip holder, kick starter
lever pivot.

BATTERY AND FUSE

Open the seat cushion and the battery box
cover(1), you can see the battery(2) and fuse
holder(3). Don't attempt to remove the sealing caps
from the cells, it is dangerous and you may damage
the battery. Please use a voltage gauge to check
the battery charging state(specified voltage is
12.8V).
29