Adaptive Cruise Control* - Set Time Interval; Adaptive Cruise Control* - Temporary Deactivation, And Standby Mode - Volvo XC 70 Owner's Manual

Hide thumbs Also See for XC 70:
Table of Contents

Advertisement

Adaptive cruise control* - set time
interval
Different time intervals to the
vehicle in front can be
selected and shown in the
combined instrument panel
as 1-5 horizontal lines - the
more lines the longer the
time interval. One line corre-
sponds to approximately 1 second to the
vehicle in front, 5 lines approximately
3 seconds.
To set/change the time distance:
Increase or decrease with the steering
wheel buttons
/
.
At low speed, when the distances are short,
the adaptive cruise control increases the time
interval slightly.
The adaptive cruise control allows the time
interval to vary noticeably in certain situations
in order to allow the car to follow the vehicle
in front smoothly and comfortably.
Note that a short time interval only allows the
driver a short time to react and take action if
any unforeseen traffic problem should arise.
The same symbol is also shown when Dis-
tance Warning (p. 217) function is activated.
Disengaging and selecting a higher or lower gear does not involve standby mode.
6
NOTE
Only use the time intervals permitted by
local traffic regulations.
If the adaptive cruise control does not
appear to react when activated, this may
be because the time distance to the vehi-
cle in front is preventing an increase in
speed.
The higher the speed the longer the calcu-
lated distance in metres for a given time
interval.
Read more how speed is handled (p. 206).
Related information
Adaptive cruise control - ACC* (p. 202)
Adaptive cruise control* - overview
(p. 205)
Adaptive cruise control* - function
(p. 203)
Adaptive cruise control* - deactivate
(p. 209)
07 Driver support
Adaptive cruise control* - temporary
deactivation, and standby mode
The adaptive cruise control can be temporar-
ily deactivated and set in standby mode.
Temporary deactivation/standby mode
To temporarily disengage the adaptive cruise
control and set it in standby mode:
Press the steering wheel button
This symbol and the stored speed's
marking then change colour from
GREEN to WHITE.
Standby mode due to driver intervention
The adaptive cruise control is temporarily dis-
engaged and set automatically in standby
mode if:
the foot brake is used
the clutch pedal is depressed for longer
than 1 minute
6
the gear selector is moved to N position
(automatic gearbox)
the driver maintains speed higher than
the stored speed for longer than
1 minute.
The driver must then regulate the speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
*
Option/accessory, for more information, see Introduction.
07
}}
207

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc70

Table of Contents