Volvo XC 70 Owner's Manual page 161

NOTE
There must be at least 50 cm between the
load securing hooks in the rail.
Removing a load retaining hook
The load retaining hooks can be easily
removed from the rail, e.g. for cleaning the
bottom of the rail.
Fold the load retaining hook down in the
direction to which its opening points.
Press the hook down lightly and at the
same time slide it to the cut-out opening.
Lift the hook straight up.
Securing the hook takes place in reverse
order.
Only applies to movable load retaining hooks.
3
NOTE
Any hook removed must be pushed down
slightly to be able to push it back into the
rail.
3
Load retaining hook correctly fitted/
incorrectly fitted
Fit the load retaining hooks correctly!
It is important that the load retaining hooks
are fitted correctly. The hooks' openings must
point away from each other.
WARNING
Fit the load securing hooks correctly. Oth-
erwise the load securing strap may fold
down the load securing hook, causing it to
come loose and the strap to slip off.
05 Loading and storage
3
Related information
•
Loading (p. 155)
05
159