Table of Contents
Advertisement
2.2 Skip. After selecting a channel, press
the red key to add a
mark behind the
item, the marked channel will be skipped
over when turning channel, press the
key once more to remove the mark.
2.3 Edit. After selecting a channel, press the green key to display the soft-
keyboard to edit channel name.
2.4 Lock. After selecting a channel, press the yellow key to add a [lock] mark
behind the item, the marked channel won't be watched until the right code is
input.
2.5 Move prog. Press the blue key to add a
mark behind the item,
presses the UP/DOWN key to move the channel to another location, press
the blue key/ OK key to set the location.
2.6 Delete All. Press the F1 key to add the
mark behind all the channels,
press the EXIT key to exit the interface and meanwhile clear the entire
channel items stored. You need to re-scan channels if you want to watch
program.
SOFTWARE UPGRADE
On Main Menu, highlight instruction of
Software Upgrade, use pressing the OK
key to update software. After upgrading,
the receiver will re-boot. And, the
receiver will appear upgrading dialog
box when turning channel if it detects the
upgrading instruction from the signal.
15
Advertisement
Table of Contents
