The CDR also comes with an in-built electronic program guide and an all-new remote control to make the best possible viewing experience. The IN Digital service brings you everything from program schedules /synopsis to 24/7 customer support at your fingertips.
CONTENTS SAFETY INSTRUCTION ---------------------------------------------------------- 4 FRONT PANEL ---------------------------------------------------------------------- 5 REAL PANEL ------------------------------------------------------------------------- 5 REMOTE------------------------------------------------------------------------------- 6 PRECAUTIONS ABOUT BATTERIES ----------------------------------------- 7 PREPARATION OF REMOTE CONTROL ------------------------------------ 8 OPERATION SCOPE OF THE REMOTE CONTROL --------------------- 8 USEFUL TIPS ------------------------------------------------------------------------ 8 CONNECTION ----------------------------------------------------------------------- 9 THE FIRST TIME USING THIS RECEIVER ---------------------------------- 10 CHANNEL MANAGER ------------------------------------------------------------- 11 GENERAL SETTINGS ------------------------------------------------------------- 12...
SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this STB near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
FRONT PANEL 1. Menu entry/ exit 2. 3. Channel up or down/ cursor movement 4. Volume decrement/ operation confirmation 5. Volume increment/ menu go back 6. Open the lid to insert a smartcard 7. Status indicator/ remote sensor/ displaying panel REAR PANEL 1.
REMOTE It’s recommended to operate each function of the keys on the Receiver by using the key on the remote controller. Please read this section to lend itself to advance your understanding of the function of the Receiver. Instruct the receiver t o e n t e r into STANDBY standby mode or recover to normal viewing mode...
P+/- Normal operation channel change; page change in list mode T V / Non-menu, switch channel mode between TV and radio BACK MENU, go back; Non-menu, channel recall Non-menu, display an information bar of the present channel, INFO press the key once more to display its brief description Non-menu, display audio options, press the directional key AUDIO to opt for an option, press the OK key to confirm, press...
PREPARATION OF REMOTE CONTROL Load the batteries to the groove of the remote control and this will enable you to operate the STB 1. Open the lid. 2. Load the batteries (AAA type), while installing the batteries match the polarities on the battery and the corresponding polarity indicated on the remote controller.
CONNECTION 1. Connect the audio and video output terminals with the corresponding input terminal on a TV set 2. Insert the digital antenna cable into the [CABLE IN] terminal on the rear panel; please notice that the connection effect should effectual 3.
THE FIRST TIME USING THIS RECEIVER The first time using the receiver, the opening picture appears. A dialog box of “No valid program to be played, start auto scan now?” appears, Use the OK instruction to scan channel. After scanning, the scanned down channels will be saved Press UP/DOWN key to turn channel, press the L/R key to adjust volume.
CHANNEL MANAGER On Main Menu, highlight instruction of Channel Manager, use L/R key to enter or exit its sub-menu right side. 1. Auto Scan. Highlight [Auto Scan]. Press the OK key to start searching automatically. After searching, the screen goes back to its program-viewing mode.
GENERAL SETTINGS On Main Menu, highlight instruction of General Settings, use L/R key to enter or exit its sub-menu right side. 1. Menu Set. Get it into. 1.1 Display Time. Set the duration when an information tape appears on the screen when turning channel.
Page 13
3. Language set. Get it into. 3.1 Menu language. Choose menu language kind. 3.2 Audio language 1#/ 2#. Set audio language kind. The actual effect rides on the support of signal itself. 4. Reserve Set. Get it into. Press yellow key to delete timer item. 5.
LIST MANAGER On Main Menu, highlight instruction of List Manager, use L/R key to enter or exit its sub-menu right side. 1. Channel List. Get it into. 1.1 Sort. Press the red key to list sorting item list, sort channel by name, frec, FAV or scrambled.
2.2 Skip. After selecting a channel, press the red key to add a mark behind the item, the marked channel will be skipped over when turning channel, press the key once more to remove the mark. 2.3 Edit. After selecting a channel, press the green key to display the soft- keyboard to edit channel name.
CERTIFICATE OF WARRANTY This certificate of warranty should be produced for servicing under the terms of the warranty. CONDITIONS OF WARRANTY 1)Within one year from the date of purchase, if any component(s) is found to be defective due to faulty workmanship or defective material made, repairs will be executed free of charge and defective part will be replaced.
WARRANTY CARD Customer Details Name: □□/□□/□□□□ Invoice Number& Date: Purchase D ate: Installation Date: □□/□□/□□□□ □□/□□/□□□□ Digital Set Top Box Model Type: Precautionary measure: Please ensure that the following bar coded sticker is common between Set- Top -Box, Retail Box, and this user manual. InDigital Franchisee /independent cable operator’s Details Signature: - Date:...