Table 4. Security menu items (continued)
Menu item
Submenu item
Password at Restart
Password at Boot Device
List
Password Count Exceeded
Error
Power-On Password
Hard Disk X Password
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
Chapter 6
Comments
state or hibernation state.
If you select Disabled,
no password prompt is
displayed; the computer
goes ahead and loads
the operating system.
To prevent unauthorized
access, set the user
authentication on the
operating system.
If you select and enable
Password at restart,
a password prompt is
displayed when you restart
the computer. If you select
Disabled, no password
prompt is displayed; the
computer goes ahead and
loads the operating system.
To prevent unauthorized
access, set the user
authentication on the
operating system.
If the security password
is set, this option is used
to specify whether the
Security password must be
entered to display the F12
boot device list.
Select Enabled to prompt
for the security password.
Select Disabled to proceed
without any user action
required.
Select Enabled to show
the POST 0199 error and
prompt for the Security
password.
Select Disabled to hide
the POST 0199 error and
proceed without any user
action required.
Refer to "Power-on
password" on page 53.
Refer to "Hard disk
passwords" on page
55.
.
Advanced configuration
71